For many modern enterprises, it is inseparable from equipment such as automatic waterproof seal inserting and terminal crimping machine. What are its functional advantages? What are the troubleshooting methods and precautions? In the process of use, it is not only necessary to make the equipment perform better, but also to avoid safety accidents.

As it is mechanical equipment, there will inevitably be breakdowns, even if we do not understand the esoteric maintenance knowledge, but the maintenance process must be mastered. Below, Hongruohao will take you to a comprehensive understanding of the fully automatic waterproof seal inserting and terminal crimping machine.

The fully automatic waterproof seal inserting and terminal crimping machine is a kind of machine used for wire processing, a new type of equipment that has just emerged in recent years. It is a multi-functional machine integrating wire feeding, cutting, stripping, waterproof seal inserting, and terminal crimping, and it is a humanized and intelligent high-end technical product. It is suitable for large and medium-sized enterprises to save labor.

The fully automatic waterproof seal inserting and terminal crimping machine have the advantages of high precision and high speed. It has a digital control interface and imported electrical accessories, featuring easy operation and time-saving.

• A. Advantages of fully automatic waterproof seal inserting and terminal crimping machine

①, Fully automatic waterproof seal inserting and terminal crimping machine boasts advanced production efficiency. As a result of the integration of all operating mechanisms in one streamline, the efficiency of a single electronic wire is shortened, and the production capacity is astonishingly twice that of traditional models, reaching 5000-7000 pieces per hour (less than 100 lengths).

②, The advanced structure design of the automatic waterproof seal inserting and terminal crimping machine breaks through the traditional automatic operation flow layout of the motor. It combines wire cutting, stripping, twisting, and terminal crimping into one.

③, The upgrading model has the advantages of stable structure and low cost. Due to the effective reduction of the long-span coordinated operation of various mechanisms in the traditional operation process, the running-in of mechanical transmission is reduced, and the unstable factors are greatly reduced, which greatly reduces the cost of subsequent maintenance.

• B. Characteristics of fully automatic waterproof seal inserting and terminal crimping machine

①, Multi-function

The fully automatic waterproof seal inserting and terminal crimping machine have the rich functions and features of the automatic stripping machine. On this basis, the functions of wire feeding, cutting, stripping and terminal crimping can be realized to meet the requirements of enterprises for wire harness and cable assembly.

②, Elaborate structure

The internal structure of the fully automatic waterproof seal inserting and terminal crimping machine is compact and reasonable, so that the equipment is small in size and light in weight, and does not occupy too much area, that is, a small area, which is conducive to daily maintenance and management.

③, Advanced design

The design of the automatic waterproof seal inserting and terminal crimping machine is advanced, and the products embody the quintessence of modern advanced control technology.

The overall design tends to be humanized, intelligent, and convenient for operators.

It is easy to operate and does not need a complex operating mechanism and special training. The products adopt advanced automatic control mode, mechatronics, and a high degree of automation.

The processed product has a good effect in practical application, beautiful appearance has moderate length, and can meet the specific conditions of the wiring harness.　

https://wireharnessor.com/product/hh-688-fully-automatic-double-ends-seal-inserting-terminal-crimping-machine/

• C. Troubleshooting method of fully automatic waterproof seal inserting and terminal crimping machine

①, Preliminary judgment

(1), If there are problems in the process of use, especially the burning smell, strange noise, and so on, it is usually serious, the operator is required to turn off the machine in time and cut off the power supply to ensure safety.

(2), If there is only a slight fluctuation in product quality, but not any major problem with the equipment, so it can be handed over directly to the internal maintenance personnel for inspection without downtime.

②, Inspection by equipment maintenance personnel in the factory

Quickly notify the prepared workers, inform them of the basic situation, and then conduct a full inspection.

Here, it can be divided into two situations.

(1), Minor troubles can be solved by themselves

After the maintenance personnel inspection, if the problem is not serious, find it and settle it for normal operation.

(2), A serious failure cannot be handled

After inspection, if the technician can not find the problem, or find that the problem is more serious, and can not be dealt with independently. The technician also needs to replace the relevant parts, report to the factory leader, and promptly call the manufacturer of the automatic waterproof seal inserting and terminal crimping machine for door-to-door maintenance and inspection.

③, Troubleshooting method

The repair plan and quotation are given according to the trouble remedy of the manufacturer, and the relevant maintenance operation is carried out after approval. After the maintenance is completed, the equipment maintenance personnel will check and confirm the acceptance, and give it to the operator to continue production after the trial operation.

• D. Operation precautions of fully automatic waterproof seal inserting and terminal crimping machine

①, During the operation of the fully automatic waterproof seal inserting and terminal crimping machine, in the event of any abnormal situation in the equipment, we should turn off the power supply in time. After a power outage, it is necessary to find maintenance personnel to carry out maintenance and debugging work.

②, In the process of using the equipment, if there is a need to debug or disassemble machine parts, do not do it without authorization, and ask the designated person to help you with the relevant work. Only in this way can you better ensure the safety of use and reduce unnecessary damage to the equipment.

③, During the operation of the equipment, do not extend any part of the finger or body into the perforation range of the equipment without the power supply of the equipment being cut off, so as to avoid accidents.