Product Features

※ Put wire slowly in from the front by hand, while rotate wire slowly, so that shield net can be combed smoothly to facilitate later processing；

※ The distance between combing wheels can be adjusted with different sizes of wire. It is convenient to brush the long shielding net by pulling the wire front and It can also overturn the shield;

※ HH-3N21A copper-wire brush: suitable for small wire diameter, with aluminum foil wire in the shielding net.

HH-3N21B nylon brush: suitable for all wires, not easy to hurt the wire, the disadvantage is of fast wear (lower speed to increase its service life)；

When the HH-3N22 crawler is brushing, you should slowly brush the shielding net from the front to back (like combing hair). You can pull the wire back and forth to increase friction to brush the knots. The distance between crawler brushes can be adjusted. When brushing a large square wire harness, the front section of the shielding net can be stripped off 30% (to prevent knotting). After brushed, the shielding net will not be shorter than the stripping length.

Technical Parameters