HH-210C Shrink Tube Cut, Insert and Heat Machine for big cable
Product Features
※ Industrial automation PLC, man-machine interface control, simple operation, stable work, high efficiency.
※ The heat-shrinkable tube is fed automatically, the heating length can be set, and the heating position can be adjusted by positioning device.
※ The production capacity can reach 300-1000 terminals per hour (depending on the manual speed).
※ The equipment is compatible, and a variety of cable assembly can be processed by changing rotating disc and fixtures.
※ Digital temperature control and abnormal monitoring of heating device. The heating device, when too low air pressure, is protected automatically to prolong the service life.
※ To prevent operator adjusting parameters wrongly, the system can be restored with one button click.
Operating videos
HH-210C https://youtube.com/shorts/gSXrsLUSTCI New energy big cable assembly
HH-210C https://youtube.com/shorts/Hp-deeAM6MA New energy big cable assembly
HH-210C https://youtube.com/shorts/aapOjFwLVTU New energy big cable assembly
HH-210C https://youtube.com/shorts/Le_FxbprpCc New energy big cable assembly
HH-210B https://youtube.com/shorts/qCEzTC61scE
HH-210B https://youtu.be/7t-0QVeJ7kA 2-pin cable
HH-210B https://youtube.com/shorts/jjnNcLxo6DU 2 wires
Details About HH-210C Shrink Tube Cut, Insert and Heat Machine for big cable
Technical Parameters
| Model | HH-210C Shrinkable Tube Cut, Insert and Heat Machine |
| Power | 220V-AC，50/60HZ |
| Rated Power | 2350W |
| Display | 4.3 Inch Touch Screen TFT |
| Running time/cycle | 5.2 seconds |
| Control Mode | PLC/ Touch Screen |
| HST Range | 7.0mmΦ~16mmΦ（≤7.0mm to be applied on HH-210B） |
| HST Processing Length | 10MM~100MM（customized rotating disc and fixtures） |
| Heating Temperature | 200℃~380℃（Adjust via the thermostat） |
| Air Supply | 0.55~0.65Mpa, clean and dry air |
| Cooling mode | Forced air cooling |
| Dimension | L 950mm*W 750mm*H 1050mm |
| Weight | 140KG |
