HH-220C Shrink Tube Cut, Insert, Heat and Laser Print Machine
Cable samples of HH-220C Shrink Tube Cut, Insert, Heat and Laser Print Machine
wire samples of HH-220B Shrink tube cut, insert, print and heat machine
Cable samples of HH-220C Shrink Tube Cut, Insert, Heat and Laser Print Machine
Cable samples of HH-220C Shrink Tube Cut, Insert, Heat and Laser Print Machine
HongHao Technology - A Wire Harness Processing Machines Supplier & Solutions Provider > Products > Shrinkable Tube Insert and Heat Series > HH-220C Shrink Tube Cut, Insert, Heat and Laser Print Machine

HH-220C Shrink Tube Cut, Insert, Heat and Laser Print Machine

Product Features

  1. Industrial automation PLC, man-machine interface control, simple operation, stable work, high efficiency.
  2. The heat-shrinkable tube is fed automatically, the heating length can be set, and the heating position can be adjusted by positioning device.
  3. The heat shrinkable tube can be laser printed automatically by host computer software, and the contents can be set. At the same time, it can print different contents on the shrink tubes of the 2 cables.
  4. The production capacity can reach 700-1500 terminals per hour (depending on the manual speed).
  5. The equipment is compatible, and a variety of cable assembly can be processed by changing rotating disc and fixtures.
  6. Digital temperature control and abnormal monitoring of heating device. The heating device, when too low air pressure, is protected automatically to prolong the service life.
  7. To prevent operator adjusting parameters wrongly, the system can be restored with one button click.

Operating videos

HH-220C  https://youtube.com/shorts/JmAlW2CDJEc +laser printer

HH-220C  https://youtu.be/Z5xPgwmj6x8 +laser printer

HH-220C  https://youtube.com/shorts/JO208qjPke8 +laser printer

HH-210B  https://youtube.com/shorts/fcyNBuqGkVc  customized copperbelt crimp

HH-210B  https://youtube.com/shorts/w8m013QnHbU  sensor cable assembly

HH-210B  https://youtube.com/shorts/qPZLTNjXo4I    4-pin flat cable assembly

Details About HH-220C Shrink Tube Cut, Insert, Heat and Laser Print Machine

Technical Parameters

Model HH-220C Shrink Tube Cut, Insert, Heat and Laser Print Machine
Power 220V-AC，50/60HZ
Rated Power 2500W
Display 7 inch multi-point capacitive screen
Running time/cycle 2.5 seconds
Control Mode PLC/ Industrial Computer
HST Range 2.0mmΦ~6.5mmΦ（≥6.5mm to be customized）
HST Processing Length 8MM~40MM（customized rotating disc and fixtures）
Heating Temperature 200℃~380℃（Adjust via the thermostat）
Air Supply 0.55~0.65Mpa, clean and dry air
Cooling mode Forced water cooling
Dimension L 900mm*W 550mm*H 1300mm
Weight 165KG

Share HH-220C Shrink Tube Cut, Insert, Heat and Laser Print Machine With Your Clients
Facebook Linkedin Youtube Whatsapp

Related products